咨询热线:0769-3882-6677中文版ENGLISH

ANATEL Published the New Resolution nº 715

Date: 2020-01-07Hits: 5057
导读:On 24th Oct,ANATEL published the new Resolution nº 715 revoking the Resolutions 242 (2000) and 323 (2002). ...

On 24th Oct,ANATEL published the new Resolution nº 715 revoking the Resolutions 242 (2000) and 323 (2002). This is the new Regulation for Conformity Assessment and Homologation of Telecommunications Products in Brazil and it will be in force within 180 days from its publication date.

Here are the main changes:

1)      Product Category List (I, II, III) will no longer exist and ANATEL will release new Technical Requirements per Product Type or Family of products. The technical requirements will define the conformity assessment models applicable to the type or family of telecommunications product, testing applicable, renewal definition, etc. ANATEL is working along with OCDs and LABs in this new technical requirements;

2)      Technical rules (such as Manual, Warnings, Labeling, certification mark, certification validity, OCD designation rules, Renewals, MRA with foreigners CBs, Laboratory acceptance) will be defined in Operational Procedures that ANATEL will release in the next months;

3)      Telecom devices used by Brazilian Army and using Military exclusive Frequencies will not need to be homologated by ANATEL;

4)      Conformity Assessment Models – This new Resolution includes the possibility of new certification types, such as: Declaration of Conformity, Declaration of Conformity with testing, Type Test Certification, Type Test Certification  with periodic Maintenance and Type Test Certification with periodic maintenance and Factory Management System Evaluation. The certification model will be defined by ANATEL in the Technical Requirements and may be different depending the product type;

5)      Market surveillance rules – ANATEL may issue an Operational Procedure for market surveillance, where it is intended that the samples will be collected in the market or in the factory unit;

6)      In the case of imported telecommunications products intended for commercialization, the identification of the approval (ANATEL logo + ID number) must be made before the product enters in Brazil, except for the cases and situations defined in the Operational Procedure.


检测中心
认证服务
新闻动态
关于东电
服务支持
联系我们

业务咨询:(东莞)0769-38826677,(天津) 022-58038033   总部电话:0769-3882-6678   传真:0769-3882-6679
公司地址:(总部)东莞松山湖高新技术产业开发区总部二路17号B栋;

(天津)天津开发区微电子工业区微四路19号D栋:(广州)广州市增城区增江街道纬五路4号5栋102-112

邮箱:service@dgddt.com; Copyright © 2018-2019 http://www.dgddt.com 广东东电检测技术有限公司 版权所有
检测认证公司   认证机构 粤ICP备17000636号

微信咨询

微信咨询微信咨询

专线联系

0769-3882 6677
专线联系电话

微信公众号

微信咨询关注微信公众号